Service: Washing Machine Repair
Washing Machine Repair in Kolkata - At Your Doorstep
A washing machine that won’t drain or spin turns into a tub of wet clothes and a week of backlog. We repair top-load, front-load, semi-automatic and fully automatic machines at your home across Kolkata - with the price agreed before work begins.
- All machine types
- Doorstep repair
- Upfront quote
- 30-day warranty
Doorstep service · KolkataPlease note: MT Appliances Repair is an independent repair service. We are not an authorised service centre for any manufacturer and have no affiliation with any appliance brand.
Washing machines fail for reasons that are usually mechanical and often preventable. In Kolkata, two local conditions do most of the damage. The first is water quality - hard water leaves scale on heating elements and inside the drum, which slowly strangles performance. The second is drainage: many older buildings and ground-floor flats have outlet plumbing that backs up during monsoon, and the machine takes the blame for a problem that sits in the wall.
Front-load machines bring their own pattern. They’re increasingly common in Kolkata apartments because they use less water and fit under counters, but their door seals trap moisture, and in a humid climate that means mould, odour, and eventually leaks if the gasket isn’t maintained.
We diagnose the machine and the installation, because a machine that won’t drain isn’t always a machine fault.
Symptoms and causes
Washing machine problems we fix
We test before we replace, so you are not paying for a part your appliance did not need.
What you notice
What’s usually behind it
Won’t drain, water stays in the drum
Blocked drain pump filter, clogged outlet hose, or a failed drain pump. Often the cheapest repair on this list.
Won’t spin, clothes come out soaked
Worn drive belt, failed motor capacitor, faulty lid or door switch, or an unbalanced load sensor.
Shakes violently or walks across the floor
Worn drum bearings, failed suspension dampers, or - surprisingly often - transit bolts never removed at installation.
Stops mid-cycle
Control board fault, water inlet issue, or a heater failure putting the cycle into error.
Not filling, or filling too slowly
Blocked inlet filter, faulty inlet valve, or low supply pressure.
Leaking underneath
Perished door gasket (common on front-loads), split hose, or a cracked outlet.
Loud grinding or rumbling while spinning
Drum bearing wear - attend to this early; ignored bearings damage the drum assembly.
Error code on the display
Tell us the code when you call. Many are diagnostic shortcuts that save time.
Tripping the MCB
Heater or motor insulation failure. Stop using the machine and call us.
Why MT
Why choose MT for washing machine repair
We check the installation, not just the machine.
Drainage and inlet problems are regularly misdiagnosed as machine faults. Fixing the real cause saves you paying for parts you didn’t need.
Both machine types, properly.
Front-load and top-load machines fail in different ways and need different handling. Our technicians work on both daily.
Repaired at your home.
No hauling a heavy machine down a stairwell.
Honest parts sourcing.
OEM or high-quality compatible parts depending on your model - and we tell you which before fitting.
Bring the error code.
If your machine shows a code, mention it when booking. It often lets us arrive with the right part already in hand.
30-day warranty
on parts fitted and labour performed.
How it works
How our washing machine repair works
Describe the fault.
Call or WhatsApp with the machine type (top-load or front-load), the brand, and any error code showing.
Technician arrives at your home.
With tools and commonly needed spares.
Diagnosis and firm quote.
We test the drain, spin, fill and electrical systems, and check the installation. Then we explain the fault and the price. You decide.
Repair and test run.
We complete the work and run a cycle so you can see the machine working before we leave.
Transparent pricing
What washing machine repair costs
What you pay
Quoted before work starts
Visit & diagnosis
₹299
Covers travel and a full inspection.
You then get a firm quote for parts and labour before anything is done. Decline and you pay only the visit charge.
Drain pump cleaning, belt replacement, inlet valve and gasket work sit at the lower end of the range. Drum bearing replacement and control-board work are the larger jobs, because both are labour-intensive. We’ll tell you honestly when a machine’s age makes replacement the better decision.
Common questions
Washing machine repair FAQs
Often it’s the cheapest repair we do. Most no-drain faults come down to a blocked pump filter or outlet hose rather than a failed part. We check the simple causes before proposing anything bigger.
Yes. That’s almost always mould in the door gasket and detergent drawer, accelerated by Kolkata’s humidity. We deep-clean the gasket, drum and drawer, and show you the maintenance routine that stops it returning.
It shouldn’t be ignored. It usually means worn bearings or dampers - and if it’s a newly installed machine, sometimes just transit bolts left in place. Continued heavy vibration damages the drum assembly, so it’s worth attending to early.
Yes, along with fully automatic top-load and front-load machines.
Most repairs finish within an hour or two at your home. Drum bearing replacement takes longer and sometimes needs a follow-up visit for parts.
Note the code and tell us when booking. It narrows the diagnosis considerably and often means we arrive with the correct part.
Sometimes yes, sometimes no. We’ll give you the repair cost against a realistic view of the machine’s remaining life, and let you decide without pressure.
More from MT
Other repairs we handle
One number covers every appliance in the house.
Book your washing machine repair
Tell us the machine type and what it’s doing, and we’ll give you a realistic time slot and an honest view of the likely cost.
Mon–Sun, 6:00 am – 11:00 pm · Doorstep service across Kolkata & North 24 Parganas